Intake Filters

Intake Filters

Proper selection of Paint Booth Air Intake Filters for enclosed paint and powder coating booths requiring a dust free environment can go a long way in preventing product rejects. Whether your requirement is for roll media or cut pads, flat media or extended surface, un-constructed or self supporting, tacky or dry texture, AFT can assist with any standard or custom sizes needed. Special sizes are never a problem and are welcomed.

Series 610

Series 610

Series 610 panels and links are designed for light commercial and industrial applications in which you need an economical solution. The Series 610 is designed with 2 layers of polyester. The down-stream layer has a light tackifier to enhance performance. MERV 7 - based upon 52.2-1999. 

Series 65

Series 55

Series 55 panels and links are designed as an economical solution crossdraft intake air filtration in paint spray booths in the automotive and industrial finishing markets. 75% efficiency on 10 microns. Two layers, 100% polyester with downstream tackifier. Heat sealed to 9 gauge internal support frame. 

Series 65

Series 65

Series 65 panels and links are designed for heavy duty yet economical crossdraft intake air filtration in paint spray booths in the automotive refinishing and industrial finishing markets. 80% efficiency on 10 microns. Two layers, 100% polyester, 3-ply media with downstream tackifier. Heat sealed to 9 gauge internal support frame. 

FR-1

Series FR-1

Filtrair FR-1 panels and links are designed for premium crossdraft and select downdraft intake filtration in paint spray booths in the automotive refinishing and industrial finishing markets. 1" panel with a 95% efficiency on particle sizes greater than 10 microns. Two layers, 100% polyester, 3-ply media with impregnated tackifier. Heat sealed to 9 gauge internal support frame. Rated UL 900, Class 1. 

AFR-1

Series AFR-1

AFR-1 panels and links are designed to provide the highest possible level of performance in all crossdraft and select downdraft paint spray booths requiring a flat panel configuration. 95% efficiency on 10 microns and greater. Two layers, 100% polyester, 3-ply media with downstream tackifier and scrim. Premium solution for superior performance. Heat sealed to 9 gauge internal support frame. 

FF-560GX

Series FF-560GX™

Filtrair FF-560GX is designed to provide premium diffusion intake air filtration in paint spraybooths used by the automotive refinishing and industrial finishing markets. It is designed with synthetic non-woven fibers, thermally bonded and progressively structured, with 100% tackification for maximum protection. A supporting downstream polyester scrim increases stability and reduces particle migration. Greater than 99% efficiency on particle sizes 7-10 microns - Filter Class EN 799 F5. Reated UL 900, Class 1.

Series 625

Series 625

Series 625 self-supported panels and links are designed for heavy duty, high velocity commercial and industrial HVAC applications. 3-ply, 100% polyester media impregnated with an internal non-migrating tackifier. It is non-toxic, unaffected by humidity and inherently resistant to microbial growth. Heat sealed to a 9 gauge internal support frame. Rated UL 900, Class 2.

Series 1010

Series 1010

Series 1010 self-supported panels and links are designed for commercial and industrial HVAC applications. Dual tackified, 4-ply, constructed of 100% polyester media impregnated with two non-migrating tackifiers. MERV 8 rating with an initial resistance not to exceed 0.25 inches w.g. UL 900, Class 2.